Information

Information

Replacing The Car Stereo Simply
Replacing the car stereo is really a chore for us. But with EGS products, it is an utterly simple thing to replace car stereo by yourself.
 Before the replacing project, it is necessary for us to do a research job on the old stereo system and the new one as well. You can follow the instructions or search on the Internet  to finish it.
First, stop your car and put the gear to parking brake, in order to disable the electrical system, in case of some sparking or short- circuiting. Then, delete the connection of negative cable of the battery with some wrench.
Second, unscrew the outer casing of the stereo system. I think you won't want to see any damages of your delicate stereo trim. So remember to be cautious, and hold all the screws. Make sure the process is under the light, a flashlight is recommened. Next, do a removal of the stereo system by some tools.
Third, pull the stereo out of the place by pliers, because it will facilitate the stereo sliding out. Don't forget the screws. Before the key step of replacing the stereo system, it is better to do a review the connection and wirings.
Fourth, it is an easy and complicated thing to do the connections. The complicated wires will make you confused. So you'd better distinguish them with each other by cable ties. These little stuff can help you a lot when doning it. Next, compare the old stereo with the new one. Usually, it is obvious to find the differences.
Fifth, one of the most important steps is to make sure there is no break or strippings in wires. If there is any, you can use  heat shrink tubes to secure the wires. Then do the connection.
Last, follow the mannual or the instrutions to instal the new stereo system.